How do I configure Load Management settings?

Created by Avinash Kumar, Modified on Thu, 1 Aug at 1:26 PM by Avinash Kumar

After adding your charger, tap 'Load Management'. Here, you can opt for either static or dynamic load management. Set the parameters as required.

For dynamic load management, you will need to specify the amperage of the mains fuse and connection type.

Within the connection type options, choose between 'CT clamp' or 'Meter' connection.

If meter connection is being used for load management, select between the two meter types, 'Acrel' and 'Eastron'. Then enter the meter address. This can be found on the side panel of the charger.