How do I use a laptop ot configure my charger?

You can manually configure your charger using a laptop.

If you have a 4G laptop, you will also need to use a laptop to do this. Here is a step by step guide:

1. Firstly, you will need an ethernet/LAN network (RJ45) cable
2. Access your network and internet settings
3. Select the ethernet settings
4. Select the option to change adapter options
5. Select ethernet adapter
6. Highlight the Internet Protocol Version 4 (TCP/IPv4)
7. Select properties
8. Select 'use the following IP address & enter the IP address 192.168.1.3
9. Press OK
10. Close all windows
11. Connect the cable to the LAN port of the charger
12. On your laptop, open a web browser and enter the charger IP address 192.168.1.5:8080
13. An account login page should now appear. If requested, enter the password 12345678
14. You should now see the parameters page
15. Change parameters as required
16. Press set & reboot